11:15 – 11:30

A Review on g-Al2O3 and Thiol Roles for Mercury Adsorption

Ms. Nur Iraizzati Shaifudin UPSI

11:30 – 11:45

Microstructure Development and Tensile Properties of ADC12 Al-Si Alloy with Different Content of Praseodymium (Pr)

Assoc. Prof. Dr. Tuty Asma Abu Bakar UTM

11:45 – 12:00

The Effect of Compatibilizer on the Fracture Surface Morphology of Nylon Fibre Reinforced Thermoplastic Natural Rubber Composites

Dr. Engku Zaharah Engku Zawawi UiTM

12:00 – 12:15

A Review on the Effect of Printing Parameters of FDM Metal Composite Parts on Mechanical Properties and Surface Roughness

Dr. Nor Aiman Sukindar UIAM

12:15 – 12:30

Effect of Simultaneous Addition of Ba and Sb on Microstructural and Phase Reaction Characteristics of Al-20%Mg2Si Alloy

Assoc. Prof. Dr. Norhayati Ahmad UTM

12:30 – 12:45

Insights into Kinetics and Isotherm Analysis of Visible-Light-Driven MXene

/ g-C3N4 Heterostructure Photocatalysts

Mr. Muhammad Syahmi Irfan Nasri UTP

12:45 – 13:00

Large-Scale Texturing Fabrication on Silicon Wafer Surfaces for Solar Cells Application

Ms. Nurul Huda Abdul Razak UKM

11:15 – 11:30

Thymol and Carvacrol Treatments Changed Actin and Microtubule Cytoskeletons of the Rat Bone Marrow Mesenchymal Stem Cells Assoc. Prof. Dr. Durriyyah Sharifah Hasan Adli

UM

11:30 – 11:45

Histological Effect of Aquilaria subintegra Leaves Aqueous Extract on Several Organs in ICR Mice

Mr. Azam Muzafar Ahmad Mokhtar UPSI

11:45 – 12:00

Two-Step MACE Texturing Technique to Fabricate Silicon Nanowires on Silicon Wafer Surfaces for Solar Cells Application

Ms. Nurul Huda Abdul Razak UKM

12:00 – 12:15

Antifungal Activity of Ethanolic Extract of Syzygium polyanthum (Wight) Walp. Leaves Extract against Several Types of Filamentous Fungi and Candida Species

Mr. Wong Jun Xian UPSI

12:15 – 12:30

Hericium erinaceus as a Treatment for Memory Deficits in Zebrafish Model of Alzheimer’s Disease: A Neurobehavioral Study

Ms. Nur Arissa Syazwani Md Nazrey

MSU

12:30 – 12:45

Physicochemical Characterization of Biomass Wastes as Potential Growth Substrate for Wild Schizophyllum commune Cultivation

Mrs. Siti Aminah Mohd Hassan UNIMAP

12:45 – 13:00

Siam-Weed Based Gelatine Electrospun Scaffolds

Mr. Ham Wen Jun UTHM

8:25 – 9:10

Keynote Speaker 2

Cytoophidia: Polymerisation and Filamentation of Metabolic Enzymes Prof. Dr. Ji-Long Liu (Shanghai Tech University, China)

9:10 – 9:40

Plenary Speaker 3

Development of Toughened Epoxy/Natural Hydroxyapatite Composite for Potential Biomedical Applications

Prof. Ts. Dr. Ismail Zainol (Universiti Pendidikan Sultan Idris, Malaysia)

Chairperson: Assoc. Prof. Dr. Tuty Asma Abu Bakar (UTM)

9:40 – 10:05

Invited Speaker 5

Advanced Microscopy Techniques by Tescan Mr. Charles Hooi (Novatiq Scientific Sdn. Bhd.)

10:05 – 10:25

Invited Speaker 6

Performing Sub 10nm Element and Crystallography Analysis in a SEM Dr. Yu Baojun (Bruker Malaysia)

10:25 – 10:45

Invited Speaker 7

Rapid Microstructure Characterization of Addictively Manufactured Alloys using EBSD and EDS

Dr. Wu Jiang (Oxford Instruments Pte. Ltd. (Nanoanalysis))

10:45 – 11:05

Invited Speaker 8

Advanced DualBeam Applications in Materials Science Dr. Zhou Yong Kai (Thermo Fisher Scientific)

11:15 – 11:15

Activity 3: Lucky Draw /Quiz

 11:10 – 11:25

Preparation and Characterization of Beads of Fish Collagen / Fish Scales Hydroxyapatite / Silver Nanoparticles by using Infiltration Method

Dr. Mustafa Mudhafar Faculty of Altuff Collage

 11:25 – 11:40

The Effect of Virgin Coconut Oil Content on the Rheological Profile of Virgin Coconut Oil-Based Lamellar Liquid Crystal of Mixed Tween 80:Brij 30 Systems Ms. Nor Ain Mohamed Arifin

UPSI

 11:40 – 11:55

Investigation of Friction Stir Welding (FSW) Process Parameter for Ultrafine- Grained Aluminium 5083 Alloys

Mr. Muhamad Nabil Faizul Hilmy USM

11:55 – 12:10

Si-Mo-Modified Aluminide Slurry Coating for High Temperature Protection of Austenitic Stainless Steel

Ms. Syamimi Abu Kassim USM

 12:10 – 12:25

Different Concentrations of Sodium Hydroxide Caustic Leaching for Refinement of Calcium Source from Dental Mould Waste

Mrs. Nur Liyana Mohd Rosli USM

 12:25 – 12:40

A Comparative Study of Graphenated-Carbon Nanotubes Cotton and Carbon Nanotubes as Catalysts for Counter Electrode in Dye-Sensitized Solar Cells Mrs. Yusnita Yusuf

UPM

 12:40 – 12:55

Catalytic Ketonization of Fatty Acids Over MgO / ZrO2 : Characterization and Optimization via Response Surface Methodology

Ms. Shamina A Aleem PETRONAS

11:10 – 11:25

Regulatory Analysis of Pseudomonas Sp. Polycyclic Aromatic Hydrocarbons Degradation Proteins by LC-MS / MS

Ms. Suzana Adenan

UPSI

11:25 – 11:40

Subchronic Toxicity Analysis of Mixtures of Christia vespertilionis (L.f.) Bakh. F. Leaf and Morinda citrifolia L. Fruit Ethanolic Extracts in Male Sprague Dawley Rats

Ms. Nurul Syahirah Ahmad Sayuti UPM

11:40 – 11:55

Ultrastructural Observation of Pollen Mites on Tetragonula fuscobalteata

Dr. Zubaidah Abu Hassan UM

11:55 – 12:10

Pollen Calendar of Stingless Bee at Taman Pertanian Sekayu, Terengganu

Ms. Siti Nur Syafiqah Mohamad Hanapi

UMT

12:10 – 12:25

Taxanomic Implications of Leaf Micromorphology in the Genus Heritiera

(Sterculiaceae)

Ms. Nabilah Mohammad UKM

12:25 – 12:40

The Stele Anatomy of Stipe and its Taxonomic Significance for Genus

Diplazium in Peninsular Malaysia Ms. Affina Eliya Aznal Affenddi UKM

12:40 – 12:55

The Morphology and Functional Histology of the Respiratory System of Reticulated Python (Malayopython reticulatus)

Assoc. Prof. Dr. Intan Shameha Abdul Razak UPM

15:45 – 16:00

Investigating the Structural Transformation of Individual Au-Incorporated CNF Interconnect

Dr. Mohamad Saufi Rosmi UPSI

16:00 – 16:15

Electrospinning of Aligned Nanofibers for Biomedical Application using a Rotating Drum Collector

Mr. Ham Wen Jun

UTHM

16:15 – 16:30

Morphological Characterization of Carbon Fibre Epoxy Composite Coated Graphene

Dr. Mohd Roshdi Hassan UPM

16:30 – 16:45

Structural and Mechanical Characterization of Producing Stainless Steel (SS316L) with Hydroxyapatite (HA) via Slurry Method

Assoc. Prof. Dr. Sufizar Ahmad

UTHM

16:45 – 17:00

A Study on Formation and Characterization of Microencapsulated Geraniol Oil

Ms. Siti Nadiah Shamsul Anuar UiTM

 15:45 – 16:00

Post-Coating Treatment Effect on the Physicomechanical and Corrosion Resistance of Plasma-Sprayed Hydroxyapatite (FsHA) and FsHA-Doped YSZ on Ti-13Nb-13Zr Alloy for Biomedical Applications

Mr. Anene Franklin Amaechi UPM

16:00 – 16:15

Effect of Milled Graphite Composition on the Mechanical Properties and Morphology of High Density Polyethylene (HDPE) / Graphite Composite Dr. Engku Abd Ghapur Che Engku Ali

UMT

16:15 – 16:30

Crystallization-Mechanical Technique for Oil Extraction from Oil Palm Empty Fruit Bunch Fibre

Ms. Kessnia Ira Ng UMS

16:30 – 16:45

Comparison Study on Mechanical Properties of 3D Printed PLA and PLA

/ Aluminium Composites using Fused Deposition Modeling Technique

Dr. Nor Aiman Sukindar UIAM

16:45 – 17:00

Composition of Surfactants and Ionic Elements from Diesel and Petrol Exhaust Particulate Matter

Mr. Muhammad Afiq Mohd Nor UPSI

15:45 – 16:00

Leaf Epidermal Micro-Morphological Characteristics in Pentace L. and its Taxonomic Significance

Assoc. Prof. Dr. Noraini Talip

UKM

16:00 – 16:15

SEM and TEM Analysis of Lactococcus garvieae and Enterococcus faecalis during Conjugation

Ms. Nur Ainaa Nabihah Mohd Ghazali UPM

16:15 – 16:30

Film Thickness, Diametral Tensile Strength and Fracture Surface of Alumina Reinforced Dental Cement

Dr. Noor Huda Ismail USM

16:30 – 16:45

Capturing Anthocyanin Immobilization to the Rice Core through the Ultra- High Resolution Electron Lenses

Dr. Arniza Ghazali

USM

16:45 – 17:00

Efficacy of Vibrio alginolyticus Whole Killed Cell Vaccine on the Immune Response of White Shrimp (Litopenaeus vannamei)

Dr. Laith A Abdul Razzak UMT